Great saw blade sharpener! Once you figure out all the adjustments needed to get started, the machine works well. After the set up is complete, you can sharpen a ten-inch 80 TPI saw blade in about three minutes. It’s a little heavy, but stores easily if you remove the adjustable angle arm which makes the unit about 13 inches long.

You can do most blades but sometimes you have to use the back of the blade but still does a great job

Just got it set up and sharpened my 24” buzz saw blade. As heavy as the base is ( made out of cast iron) this blade, when mounted would almost tip the sharpener over. Won’t be a problem with smaller saw blades. I had to make a center adapter for this blade had a larger hole than the ones supplied with the unit (not a problem for my shop). It comes with a diamond wheel. Some indicate that they don’t get but one or two blades sharpened before it wares out, but in their pictures they are not using the water cooling. Take the grinding slow and use the water cooler and it should last thru several blade sharpening. The diamonds don’t ware out, they get knocked out of the binding material. The angle markings seem to be spot on, this makes the set up quick (once the individual blade settings are figured out ).

Works well. Made a few adjustments to fit my needs.

I started by tearing the entire thing down to clean and lube all the parts and understand all the adjustments possible. This is something you probably want to do to get the smoothest operation. I also bought an assortment of grinding wheel grits since I didn't know what grit was included with the machine or what would work best for the types of blades I had. There are many grits available in the 125x10x32x8mm size that fits this machine. After comparing the ones I bought separately (#150, #180 & #400) I can only guess the stock wheel is about #120. It shows up unmarked and seems just a bit more course than any I bought. The stock one is good for heavy material removal on blades that are in really bad shape (burning your wood) but if you just want to touch up a serviceable blade even 150 might be too course. If you can get a water dripper for this it's definitely worth the trouble. It seems to be designed for one and dry grinding loads your wheel quickly. Especially if you use something finer than #150. It's probably why they deliver such a course wheel. The stock one doesn't load up too quickly.

This circular saw blade sharpener is well made and works great

Easy to use works well

Narzędzie wymaga poprawek, i nauki. Trochę zbyt duże bicie na tarczy i luzy na prowadnicach. Jakość adekwatna do ceny. Jak to wszystko ogarnąć to da się dobrze naostrzyć tarcze.

Sharpening my wood equipment tools in my shop.