Recenzje klientów dla VEVOR Przenośna Piła Taśmowa Rozmiar Cięcia 127 mm, Metalowa Piła Taśmowa Prędkość Cięcia 42-144 m/min, 1100 W Piła Taśmowa do Metalu Regulowany Kąt Podstawy 0°-45° do Szybkie Cięcie Drewna Plastik

Great unit, instructions need to be a lot more detailed. It also needs a trouble shooting guide as I had an issue with the blade slipping off and damaging the wheel covers. Over all with a little practice I am impressed and would recommend.

Easy to set up and use. I have only used it as a benchtops saw. While it lacks the speed of a TCT chop saw it is quite a bit cheaper and more versatile. Setting up straight cuts was a breeze..Angle cuts at 45 degrees reduced the size capacity quite a bit. With 50 X 50 X 2 mm steel tube it cut quite readily..Be careful of speed and pressure on the cut. Already lost a couple of teeth on the band. This is about the max size on 45° I had to remove the guide to get it to drop through and finish the cut. I think it would be a great idea with multi speed devices if you could provide a guide indicating what speed for what material. Adjusting for correct angle and vertical was quite easy .Only needed one test cut, adjust and mark the base. Next cut was bang on. So far so good. Bargain at the price. Delivery was exceptional to Australia. Tracking was also ok.

I've been working on a small project. The last few days and have been using this being saw to cut material, the material. I'm cutting railway spikes and I found him as dexterousl, but to be very effective., simple to use. I am not sure. If there are other blades available. If they were, I would probably go to a more a 24 or 36 tooth blade. But other than that. I find the set up installation and removal of the Blame to be quick and Simple. The only thing I think needs to be added to the bainsaw is a lock- on switch so you can let it cut down by itself. And a chain or a lock, so you lock it in the closed position for easy carrying. Maybe another meter of power cored as well. Happy with the saw.

Very nice cut off saw, feels good in hand nice balance very powerful cuts smooth sound great cuts fast, can’t go wrong with this band saw for the price

Good quality for the price you pay and works extremely well happy with my purchase would definitely buy again,

Impress with the saw work well. Reason for sum four star are (1) the power should come out at the other end of the saw when using the saw on the base. It not a problem when using the saw in portable position. (2) The screws for the saw blade end cover are just to small. I don't believe they will last. The need to remove them every time you change the saw blades for difference type material. After saying this the saw is wort buying

This band saw is nearly identical to the Harbor Freight Hercules version, but for almost half the cost. However, this base is only useful to cut in the horizontal direction. The Harbor Freight base is far more flexible, offers to cut in both the horizontal and vertical planes. It comes with a table to convert it into a mini vertical upright band saw. Therefore, rather than buying this combo saw and table, I suggest buying just the band saw alone, and purchase the Harbor Freight base over this one. This band saw fits on the HB base perfectly.

I have just built my own cnc mill and needed a way to cut stock, and after looking around, this was just the best bang for buck deal. I can't give 5 stars only because the saw drops down by itself very easily. I'll probably find a custom way to fix this, but as stock it can be a little dangerous. Just approach it like it will bite you and you should be fine :)

I have been using this unit since about mid January, 2024. Its a fine band saw for a small shop. Remember that this unit is a dry band saw, so don't use lubrication like you might see on a larger unit. The plastic pulleys make any lubrication launch the saw blades out of the machine. As long as you don't lay down on this saw like a crazy person expecting it to cut through 1 in of steel it will perform perfectly. I personally recommend using speeds 1-3 for metal and 4-6 for wood, but go ahead and experiment. One technique Ive had to use on this unit is using a high speed like 5 or 6 on metal with light pressure just to start the cut then I adjust back down to like 3 or 4 and it goes smooth from there. I like the quick adjust clamp, however I wish it was more robust, it just feels a bit weak, but has held up thus far. The degree markers are surprisingly accurate for angled cuts. Overall great unit for the price. And has lasted well since purchase. Written on 12/14/2024.

This has worked well on plastics, metal, and wood. I have cut thin steel up to 3” schedule 40 metal tubing. The inly downside is that it does not lock down and I would like more clamping options.