Recenzje klientów dla VEVOR Pompa zanurzeniowa do studni głębinowych, 3 KM/2200 W, 230 V/50 Hz, przepływ 9,8 m³/h, wysokość podnoszenia 144 m, z kablem zasilającym o długości 9,1 m, pompy wodne ze stali nierdzewnej do zastosowań przemysłowych, nawadniania i domowych, stopień wodoodporności IP68

Arrivata in tempi rapidi a prima vista ottimi materiali

I have had this pump in operation for a month. I have great water pressure and no issues. I would recommend it and would buy again.

Fast shipping fantastic price saving for a backup

Well built excellent value

Tuvimos un problema y nos lo solucionaron rápidamente.

This thing is exactly what we needed to get everything back up and running. It works perfectly.

Easy to set up and works like a champ. Now running long enough to say this pump is very strong, very quiet, and works as well as the one I replaced at 1/3 the cost.

Price could be a little better, but we use it to pump river water uphill. Pumps about 500 feet horizontally, with a head (lift) of around 80 feet. Pressure tank holds it steady at around 80 psi when not in use. When in use, setup triggers pump on at around 65 psi, and off at about 80. When using it to run irrigation (about 15 sprinkler heads, around 60 gpm), the pump moves so much water, it will actually cycle the system, instead of constantly running, which is pretty sweet when you consider its max flow is 37 gpm. Read description carefully, as it is a 220v pump, meaning you'll need 2 legs of your single-phase system. At full load, it pulls just under 10 amps (5 amps per leg), meaning you could get away using 14 awg copper (stranded if running through conduit with lots of turns, solid or stranded if using UF wire), but because we were running such a long distance, we opted for 12 awg. Read on if you want to do the install yourself To do it yourself (if you feel electrically inclined), you'll need at least 3 runs of wire, 4 if you want a neutral in the box (not required for this). I usually add a neutral, just in case I ever want to convert it in the future to an outlet or something (using either only 1 of the legs, or using both on separate legs, with common neutral and double pole breaker on the other end). Choose two of the following colors to use as your hot legs: red, blue, black (if adding addt'l runs, use yellow, orange, purple). Next, if running a neutral, you'll need a white wire (for simplicity, we'll skip the banding option), then you'll certainly need a ground, which must be green. Assemble your conduit (you can get away with 1/2 inch (sch. 40), but if it's a long run, I recommend 3/4 inch (sch. 40) (not for underground use, if going underground, use sch. 80 and 3/4 inch pipe). If using UF wire, simply bury it in the trench following depth guidelines. Before filling in all the way, add a line/run of metallic "buried electric line" tape about 8 to 12 inches below the ground. Use wire lubricant when pulling, it makes a difference (trust me). Use a vacuum or similar to "suck" jetline through the pipe (use a grocery bag or similar on the other end). Next, attach mule tape to the jetline and pull that through, or if you're confident you can get it through, using mule tape attached to the bag. You'll attach your wires all bundled and taped to the mule tape, then using lube, you'll pull the wires through the conduit using the mule tape.

Vevor pumps are the right blend of dependability and affordability, I have no reservations using them for my customers. Vevor pumps have always performed flawlessly and shipping is usually super fast.

Funciona muy bien,consumo real 800w