Recenzje klientów dla Obciążnik zaczepu przyczepy VEVOR, kategoria 1, 3-punktowy, o udźwigu 363 kg, do zaczepu przyczepy o szerokości 5,6 cm, stalowy, o dużej ładowności, z drzwiami przesuwnymi, zielony

FedEx shipping is terrible everytime I receive my product from Vevor the product has been damaged from FedEx shipping the bushings on the product need to fit snuggly I have had to re shim with the correct size bushings

Nice but only fit four 80lbs bags of concrete.

Does what its supposed to do, doesn't work well with a quick hitch but perfect just on the 3 point. Seems very strong, takes the weight well

I really like the overall quality of the sheet metal work and the welding. The reinforced tabs for the lower lift pins were a great feature. The one negative I have about the unit is that it came with undersized pins for the lower lifting arms. These pins are not 7/8 inch which is standard for a category 1 hitch. Instead, they were smaller pins that had a very fragile sleeve to fill in the gap between the pin and the hole on the lift arm. Why not just spend the extra five dollars or so and use actual category 1 sized pins (7/8 inch.)? I ended up going to TSC and getting a new set of pins, both lower and upper of the correct size and then had to ream the holes on the lower pins mount to 7/8 inch to install. Not a big deal but something I shouldn’t have to do on a product that’s advertised to be a category 1 implement.

Overall this is a solid piece of kit. I purchased it to add some ballast to the rear of my TYM 4215, which has excessive lifting capacity for its weight and can easily tip itself over. Overall the quality of this ballast box is really good - uniform paint, decent welds, sturdy, and I like the tool holders for a place to stick a rake and shovel when doing loader work. It's a good value compared to the name brand ballast boxes which are easily three times as much at the local dealerships for the same thing. In fact, it was cheaper than used junk people were trying to sell locally around here. BUT - the 800lb capacity is very optimistic. I filled mine with bags of dry concrete mix - pretty dense stuff, and I was only able to get 480lbs worth before I ran out of room in the box. This would be great for a little Kubota BX or similar machine, but it is a bit on the small side when you get into the compact utility class. If you need to throw 500lbs of weight on your 3pt hitch, this is a solid and affordable way to do it. But if you need more than that, you'll want to find a different solution unless you plan on filling it with lead shot.

Not truly quick hitch ready out of the box. The lower two lift pins are about 1.5 i chest to narrow for U.S. quick hitches. Easily fixed with some grade 8 bolts, washers and nuts. Overall after adding the grade 8 bolts to create extensions for lift pins I am extremely happy with this product.

I was looking for something to weight down the back of tractor a little better than the box scraper or mower. Using sand in this ballast box really did make a difference. The unit came quickly and there really is not much to do in the setup. Real easy to put together. My only concern at the welds on some parts of the ballast. Only time will tell but for now it seems like a solid buy.

Overall it is a good item. Quality metal was used with decent welds. The quick hitch points could be of better quality. But overall I would purchase again if needed.

The Vevor ballast box works great, but its not quick hitch compatible unless you have a quick hitch with the adjustable top link hook. I purchased one from Vevor as well....the ballast box is built good enough for what its designed for....one of the lower 3 point pin arms was slightly bent when I received it, and it seems this is quite common....a few nudges with the sledge hammer and got it bent back into the proper position. If you buy one of these ballast boxes, buy the quick hitch that Vevor offers as well...it'll save you time and a lot of headache, plus you won't hate yourself when you try to remove it after you've filled the hopper with sand, gravel, or whatever. The 2 cylinders in the one side work great for holding a shovel, or rake. This box will definitely be useful when moving heavier items around with my pallet forks, and even doing loader work. The ballast box doesn't stick out as far as most tractor implements, so it'll allow you a bit better maneuverability in tight spaces. Its somewhat easy to use, if you have the quick hitch...if not, be prepared for a struggle, or pull the access door on the front of it to dump out whatever you used for ballast in order to remove the box from the 3 point.

I have no odeau how you can fit 800 pounds in it. Otherwise it is what is, a box