Recenzje klientów dla VEVOR 500x Ukryte elementy złączne, przekładki do desek tarasowych, uniwersalne klipsy kompozytowe i plastikowe elementy złączne ze śrubami, odpowiednie do odstępów między deskami 5,5 mm i wysokości desek 7 mm

Work fine with Trex. Fit perfectly in Trex install tool

Good quality product, very smooth transaction.

Great and useful

Great fastener T-clips and great price! Worked perfect with Trex composit decking.

These do not fit the Trex groove. To remedy this, I used a router with a piloted bit to modify the groove on the Trex boards. Worked great after that.

The spacer/holders work very well and provide a uniform space between deck boards. My conern is how long they wiĺ last compated to metal holders/spacers. Time will tell.

the clips worked out as a good purchase

Best price for a good product

Going in I had concerns if these would be the right size for Trex brand composite, but they worked perfect! Stainless steel heads are notorious for stripping easily, no matter the brand—and these are no different. A piece of advice— If it stops or starts to strip then STOP! Back it out, toss it and use a fresh one. It’s a real pain if it completely strips and gets stuck halfway in, so try your best to avoid that at all costs. They did provide two of the longer screw driving bits. The first one wore out about 1/3 thru the box and I barely made it thru the job with the second driving bit. You may want to purchase a could extra long T15 driving bits. It’ll help a lot. Fresh bits don’t strip. After they get worn it strips the screws easier

This actually looks and serves as a direct placement. It works but, here is the problem. The screw in the center is universal such as a wood frame or steel. My deck frame is steel. So you must drill a pilot hole and it's a 50/50 shot whether the screw trys to start at an angle or straight. The screw is very soft and strips very easy. Other than that all good.