Recenzje klientów dla VEVOR Daszek na drzwi wejściowe 965x2975mm Dach Folia przeciwsłoneczna UF50+ PC Daszek na drzwi wejściowe Płyta PC + uchwyt ABS + łączniki aluminiowe Daszek półokrągły Dach na drzwi wejściowe odporny na promieniowanie UV Daszek półokrągły Brązowy

Looks good only down side but might be my fault installing was one plexiglass got water intrusion , should have clear caulked edges maybe , will order more in future

Easy install using the supplied anchors. Recommendation of two people to install would have made it easier but an absolute necessity.

It looks good and is a good value for the money but it was a little bit difficult to assemble and install. At 120 inches long I would say if I would have been easier with 3 people instead of 2.

Installed on the scholie to protect people loading an unloading from the elements . Blah blah yada,yada

Title has all the answers. Helps protect from rain and sunlight . Cost effective option so highly recommended

Sticks out a bit too far. Parts to install we're not used as they seem to be for concrete or something other than wood siding

The 91.5 cm measurement is wrong ??????????????????????????????????????????????????????????????????

I will give this a mostly respectable review because once it is assembled, it appears structurally sound, and looks good. Price is excellent. BUT, assembling it isn't easy. Once the two-piece corrugated canopy top is assembled (which is pretty easy to do), you need to thread it into the narrow grooves in the side braces. That's hard. Takes a lot of fiddling and jiggling with two people. Also, the tiny screws (Phillips head) that are supposed to anchor it all together on the four corners are tricky to get into the holes in the side braces, because those holes are down at the bottom of a cavities that are deeper than the screws are long. So you need to hold the screws with a tweezers or needlenose pliers to get them seated properly. They match up with the holes in the side braces only roughly, so screwing them all the way in takes a lot of force. Misaligned self-tapping. A small screwdriver won't do the job. Also the bars on the canopy top are identified as "front" and "rear" and, somewhat perplexingly, "rear" is on the outside edge of the canopy, and "front" is near the wall in the back. Duh? I'm an engineer, and the design of these is not particularly user-friendly.

Fast shipping. Awning assembled and installed easily. Quality looks good - will see how it holds up to Michigan snow loads sliding off roof above. I would revise to 5 stars if it survives winter.

We bought this August 27/26 and received it Sept 03/26. We're in Alberta so shipping was quick. Item was packaged well. I thought the mounting brackets would have been made of metal but instead they were plastic. A few screws they supplied were cheap and the heads stripped so I used my own. It took a while to get together but thanks to a few YouTube videos it was not so bad. I did most of it myself and my wife helped me with some. Mounting it wasn't too hard because it's fairly light but it did take two of us. Once it's mounted it looks nice, but my concern is, how it will hold up during some of the high winds and heavy snowfall we get in Alberta. Time will tell and update after a year or so. Would I buy this again? Right now I would say no, because in my opinion the mounting brackets should be made of metal and the plastic tinted sheets could be thicker. Over-all, it does looks good.