200 PSI-Rated HDPE-Aluminum-HDPE Three-Layer Air Compressor Line Kit Resists Cracks and Corrosion

The VEVOR air compressor line kit features a three-layer HDPE-aluminum-HDPE structure, making it highly resistant to cracking and corrosion. It also has the structural strength to deliver high-pressure shop air for extended periods. This construction uses aluminum's strength and pressure resistance, combined with HDPE's chemical resistance and flexibility, to create a piping system that lasts longer than single-material systems in tough factory and workshop settings.

This air compressor line kit can handle working pressures of up to 200 PSI at 73°F and 160 PSI at 140°F. It works well in both hot and cold conditions, which is common in busy automotive and industrial shops. The system won't break down in the summer heat or during long periods of high-demand compressor cycles that raise temperatures above normal levels because it has two pressure ratings.

Complete 200FT x 3/4" Kit for 40 Clips, 5 Brass Valves, 5 Blocks, Cutter and Bevel Tool Included

This air compressor line kit comes with everything you need to install it: 200FT x 3/4" HDPE-aluminum tubing, 4 tee fittings, 1 elbow fitting, 6 NPT fittings, 5 four-way aluminum blocks, 5 brass valves, 5 brass plugs, 40 tubing clips, and a special tubing cutter and bevel tool. A single purchase includes everything you need to build a complete, stable shop air delivery system.

The all-in-one accessory package ensures every connection point is covered from the first planning stage through final installation for garages and workshops, whether setting up a new air distribution network or upgrading their current infrastructure. Because the kit comes with a tubing cutter and a bevel tool, you don't need many additional tools to install it. 

O-Ring Sealed Connections Deliver Leak-Free Air Transmission Across Every Fitting

This air compressor line kit has O-ring seals at every connection point. These seals ensure there are no air leaks at fittings, tees, blocks, and valves along the entire 200-foot run. In auto shops, garages, and factories where air pressure must be stable for tools to work properly, eliminating leaks maintains the quality of the work and the efficiency of the compressor.

The O-ring sealing system works with the natural stiffness of the HDPE-aluminum tubing to keep the joints strong, even as pressure changes and temperatures rise and fall. The O-ring design is a reliable long-term solution for professional workshop air distribution because it holds up well across the full 200 PSI working pressure range. 

Two Corner Connection Options for 90° Elbow Fitting or 6–8 Inch Radius Bend for Flexible Routing

This air compressor line kit features two corner connection options, making it compatible with a wide range of shop layouts and routing needs. The 90-degree elbow fitting that comes with it makes a strong right-angle connection that works well for structured runs along walls, ceilings, and framed column routes where a sharp turn is both useful and looks good. The fixed-angle method works best when the installation is planned and the routing paths are established before installation begins.

The radius bend method allows operators to shape HDPE-aluminum tubing directly, with a supported bend radius of 6 to 8 inches. It is useful for layouts that need more flexibility. This method eliminates the need for extra elbow fittings at gentle corners. The two methods together give installers complete routing freedom on uneven shop layouts without the need for separate adapter kits.

Air Compressor Line Kit 3/4" x 200FT Tubing Offers High-Volume Airflow for Automotive, Garage, and Factory Use

The 200-foot tubing run in this air compressor line kit has a 3/4-inch interior diameter, which is the right size for delivering a lot of air over long pipe lengths without significant pressure loss. Pipes with larger bores experience less friction over long distances, ensuring that tools and equipment at the end of a 200-foot distribution network receive the same working pressure as those near the compressor.

This air compressor line kit can cover 200 feet of space and connect multiple branch points from a single run using the four-way aluminum blocks and tee fittings that come with it. It makes a branched distribution network without needing a separate main line for each zone. The 200-foot length gives you the reach you need to cover most single-floor commercial spaces in a single installation, making it easy to add more compressed air access to growing workshops.

5 Four-Way Aluminum Blocks and 5 Brass Valves Enable Multi-Zone Shop Air Distribution

With the five four-way aluminum distribution blocks in this air compressor line kit, a single 200-foot trunk line can be split into several separate service zones, each with its own brass shutoff valve. This design lets workers work on one area at a time for maintenance, tool changes, or pressure adjustments without cutting off air to the rest of the shop. In multi-bay automotive shops and production floors, zone isolation is a must for operations, not a luxury.

Five brass valves and five brass plugs work together to control air flow and seal unused ports. Capped outlets prevent pressure from dropping and contamination from occurring at branch points that aren't in use. Aluminum blocks, brass valves, and plugs work together to form a modular distribution system that can be changed or expanded as the shop's layout and workflow evolve.

Leak-Proof O-Ring System and Push-Fit Assembly Cut Installation Time in Any Workshop

You don't need any special plumbing skills or bonding compounds to install this compressor line kit. The O-ring-sealed push-fit connections at each fitting hold securely with just hand pressure, and the included tubing cutter ensures every connector has clean, square cuts that fit perfectly. The easy connection method significantly reduces setup time for shop owners who want to do it themselves or have staff handle it.

The 40 tubing clips that come with the system hold the 200-foot run to walls, ceiling joists, and framing members at regular intervals. It keeps the system organized and safe from accidental contact or movement. Proper clipping also prevents compressor pulses from vibrating through the connection, keeping it strong over years of daily use in high-cycle workshop settings.