Recenzje klientów dla VEVOR Kowadło jednorogowe 10 kg, kute stalowe narzędzia z okrągłymi i kwadratowymi otworami, kowadło, wytrzymałe narzędzie kowalskie, jubilerskie, trwałe i solidne

Excellent value. Not a “perfect “ anvil, but fully functional and all working surfaces flawless. Pritchel hole is too large and in a bad position. I machined an adapter that works pretty well. Rebound is better than my old anvil but not as good as some. However rebound is related to hardness and too hard would make it prone to chipping. I’m happy with it.

I bought this anvil for two reasons. 1) It has an HRc hardness of ~55, instead of only ~50 which is what the blue ones are. 2) Because the picture shows the horn and round hole being flush with the flat surface of the top of the anvil. This second reason turned out not to be the case. There is about a 1/ to 3/8 inch step there. I have since learned that the step is useful for some things but it does mean the round hole is not the same height all the way round, which makes it less useful for using it as a Pritchard hole. I plan to weld some fender washers onto the end of a pipe that will fit in that hole, and then grind one side flat to fit in the hole and solve this problem. The anvil itself is quite good, and for the price is down right amazing. Edges are sharp, so you can break the corners with a file to set the corner radiuses at the size you want. The anvil rings a bit, but I think with a magnet under the horn and a chain around the base this tones it down nicely. (other anvils also ring and can be quieted the same way)

Should give me alot of years of service,thanks vevor for giving good products at great prices with exceptional customer service.

The horn could be more smooth. I will have to grind it. One of the holes should have been square, but both holes are round. Apart from these things, I am satisfied.

Je suis contente de l'enclume, mais je l'ai reçue avec l'emballage déchiré. Il aurait fallu un emballage plus solide, car il était un peu léger par rapport au poids de l'enclume.

correspond à l'article sur votre site -forme -qualité -présentation -petit bémol l'emballage à revoir -Livraison dans les temps

Bonne enclume, achetée pour débuter dans la forge. Arrivée rapidement avec suivi du paquet. Je voulais pas trop lourd pour ne pas me casser le dos, je suis servi. J'ai dû passer un coup de lime dans les trous pour retirer quelques bavures, rien de bien grave. Je recommande ce produit.

In apparenza più che ottimo le prime martellate sono state rette egregiamente , penso che per il prezzo pagato sia un ottimo prodotto.

It's heavy, hard and here. Affordable too. Ugly blue, but fixed with wire brush and some bluing. Packaging is laughable (cardboard box) Good flat top. If you are looking for an affordable, portable (or starter) anvil, (less than $2./lb), this is for you. Should outlast me....

Very good for the money. This anvil needed some “finishing off”, the casting lines on the horn, the general shape of the horn & all around the edges, I removed the coating & brought it into shape with a sanding flap disc on a grinder, then finished off with some large files. I wanted the coating off all of the main surfaces & all the edges & right angles. This was an easy job & left me with an anvil that is perfect for my own personal use. Now I just need to find or make a stand.