Recenzje klientów dla Widły paletowe VEVOR 1490x100x230mm, wózek widłowy, udźwig 1814 kg, widły o długości całkowitej 149 cm z ostrzem 109,2 cm, wózek widłowy z regulowanymi zębami wózka widłowego, ładowarka czołowa, rama paletowa

Good value. Handles on securing bolts interfere with each other and are too short to provide adequate tightness. I use the end of a closed end wrench to tighten.

These are heavy duty, we'll see how the last. The hardware might be the only failing point since it's only grade 8.8 rather than 10.8 or 12.8 which make those extremely soft and prone to failure. Vevor needs to do a better job at protecting their product for shipping, the box looks like it went through a war. It cam with holes poked through both ends and a patch from either their warehouse or FedEx. The package is very heavy, so be aware when you go to move it.

For the price, hard to complain. But if asked I would say the bolts that hold the forks to the bucket are hard to keep tight. If they get loose and you don't catch it, it could cause all kinds of problems. I would rather have bolts with hex heads, and likely will replace them later, so I can tighten easier with a wrench.

Over all I like these forks. After several times using them, there’s something I would change with the clamps. You have to use a cheater bar to get them tight and the threaded rods that’s bent over as a handle interfere with each other. The solution I’m going to implement is cut off the bend on the rod and weld a large nut to the to the top. Then a wrench or socket could be used to tighten each rod. Otherwise I’m very happy with them

Works good, but 1 fell off during operation when backing out of pallet. Othwlerwise I am happy with them.

Took a while to arrive but it travelled quite a distance, kudos !! Great implement addition for my small estate tractor. Completely adequate and adaptable for different tasks. No issues. Good buy. Thank you Vevor!

These forks work great, were easy to install and did the job well. Good Deal at a Great Price. I use thgem 4 to 5 time qa week to move pallets and equipment around and into storage for winter.

Lifted my load great. Cross member broke, allowing the forks to move. Screw down bolts need to be separated more, so they don't hit each other or change to a large bolt head.

Read description carefully forks do not have a 60 working length seem to be holding up ok didn't fit my bucket verry New bucket cutting edge. Is to thin for the front of the forks to clamp on tight

These forks worked great, lifted very heavy logs with no problem. But the Stabilizer Bar cracked the first day. The welds between the bar and the ends (that slide on the fork) werent strong enough. I'm searching for a heavy duty bar now. But the forks are very heavy duty, impressive for the price. I do recommend using a rubber blow hammer to get the screw bolts really tight, and keep it with you b/c they do get loose and/or you will need to bang the fork straight periodically. But for occasional use, they are great